Thermoplastic paints, Road Marking paints, Traffic Paints,Traffic Signs, Road safety,

ULTRA-BOND PRIMER

 (PRODUCT INFORMATION)

 

DESCRIPTION
ULTRA-BOND PRIMER  IS  A  HIGH  QUALITY  BONDING   MATERIAL  FOR  THERMOPLASTIC  HOTMELT ROAD MARKING MATERIAL AND  THE  ROAD  SURFACE.  IT  IS  MADE  FROM  HYDROCARBON AND  NATURAL  RUBBER  RESINS.  THIS  MATERIAL  SERVES  AS  THE  BINDER  BETWEEN  THE ROAD  SURFACE AND  THE  NEWLY  LAID  THERMOPLASTIC  ROAD  MARKING MATERIAL.  IT HELPS MAKE  THE SERVICE  LIFE OF THE  MARKINGS  ON  THE  ROAD  LONGER.

APPLICATION
ULTRA-BOND PRIMER  IS  SUTABLE  TO  ALL TYPES  OF ROAD SURFACES,  IT  CAN  BE  SPRAYED BY  ANY  TRAFFIC  PAINT  SPRAY  MACHINE.  AFTER SPRAYING  THE  ULTRA-BOND PRIMER,  CHECK  THE  DRYING  TIME  USING  A  DRYING  TIME  DETECTOR  APPARATUS,  IF  NOT AVAILABLE,  USE FINGER  TIPS.  THE  BEST  TIME  TO  LAY  THE  MELTED  THERMOPLATIC  IS  WHEN  THE ULTRA-BOND  PRIMER  SURFACE  IS   ALMOST  DRY.  NOTE  THAT  THE  ULTRA-BOND PRIMER  DRYING  TIME  DEPENDS  ON  THE  TEMPERATURE  OF  THE  AREA.

SPECIFICATION  
–  GLUE  CONTENT                       NOT  LESS  THAN  10%
–  VISCOSITY                                  30 ± 5  CENTISTOKE
–  DENSITY                                     0.87 g./ cm³
–  DRYING  TIME                             NOT  MORE  THAN  5 MINUTES
–  ACID  BASE  VALUE                    6.5 – 7.5

SURFACE  PREPARATION
THE SERVICE LIFE OF THE ROAD MARKING IS DIRECTLY RELEVANT TO THE  DEGREE OF SURFACE CLEANING PERFORMED. CLEAN AND FREE THE SURFACE  FROM ALL FORMS OF DIRTS LIKE DUST, OIL AND GREASE STAINS. USE POWER TOOLS, CLEANING EQUIPMENTS, BROOM OR BRUSH IN CLEANING THE  SURFACE. ( USE MILD DETERGENT AND RINSE WITH CLEAN WATER IF NECESSARY )  ALLOW THE ROAD SURFACE TO DRY COMPLETELY AFTER CLEANING AND BEFORE  SPRAYING THE ULTRA-BOND PRIMER. FOR NEW CONCRETE (CEMENT),  WAIT  FOR THE PROPER AGING BEFORE SPRAYING THE ULTRA-BOND PRIMER (RECOMMENDED 15 DAYS).

COVERAGE
6.25  SQUARE  METER  PER  LITER  SPRAYED  AT  THE  RECOMMENDED  THICKNESS  125 MICRONS.

PACKAGING
AVAILABLE  IN  PAIL ( 18  LITERS   )  AND  DRUM  ( 207 LITERS )

OTHER  DATA
KEEP ULTRA-BOND PRIMER CONTAINER TIGHTLY CLOSED WHEN NOT IN USE.  STORE IN A WELL VENTILLATED AREA WITHOUT DIRECT SUNLIGHT AND HEAT.  KEEP AWAY FROM THE REACH OF CHILDREN.

CAUTIONS
ULTRA-BOND PRIMER IS FLAMMABLE. KEEP AWAY FROM  HIGH  TEMPERATURES  AND FROM ANY SOURCE OF IGNITION. AVOID SKIN,  EYES CONTACT.  AVOID  DIRECT INHALATION. WASH  HANDS WITH SOAP AND CLEAN WATER AFTER  USING THE ULTRA-BOND PRIMER.